*New* CD Print enabler for iP4820, MG5220, MG6120, MG8120
Posted on February 8th, 2011 in All Instructions, Blurb2, Blurb_full, Side3 by QuadCore || 75 Comments
The new models appear to be working well for most users.
CD Print enabler for iP4820: confirmed
CD Print enabler for MG5220: confirmed
CD Print enabler for MG6120: confirmed
CD Print enabler for MG8120: confirmed
1. Remove Black Plastic
a. Lower the inner door and remove the black plastic piece. A screwdriver or fingernails will suffice in prying it off.
b. Raise the inner door back up.
I do not have pics of the new models. Please send pics to damnprinter@gmail.com
2. Enter Service Mode:
a. The printer is plugged in but turned off.
b. Hold down the RESUME button (Triangle pointed down) .
c. Keep holding the RESUME button and now hold down the Power Button as well.
d. After 5 seconds of holding both buttons let go of the RESUME button but keep holding the POWER button.
e. Press the RESUME 5 or 6* times and then let go of the POWER button.
f. When the Power LED lights in green, the printer is ready for the service mode operation and the CD-Print Tool.
*iP4820 requires 5 times and uses the Resume button.
*MG5220 requires 6 times and uses the STOP button.
or
aa. Press and hold the ON button.
bb. When the Power light is steady, press the OK button to light up the panel.
cc. Press the Stop button 5 or 6** times.
dd. Release the On button.
ee. When the Power light is steady, the machine is ready.
**MG6210 requires 6 times.
**MG8120 requires 6 times.
3. Launch the CD-Print-Tool v7
a. Select EUR from drop down and press SET. Wait for it to finish.
b. Select EUR from drop down and press SET. Wait for it to finish.
c. Select EUR from drop down and press SET. Wait for it to finish.
d. Press the Print 2 button. Print 2 may not work with your model…move on to step e. (Three sheets will print)
e. Select EUR from drop down and press SET. Wait for it to finish.
f. Press the Print 1 button. Select Rear Tray and print the sheet to confirm changes. (One sheet will print)
The CD Print Enabler may crash, just re-launch it.
Note: Error code 006 means no connection to the printer by the software. This means your not in Service Mode.
Note2: While CDRS=xxxx is a strong indicator of success or failure, it is not absolute. Verify by completing the rest of the steps.
4. Reinstall the driver:
a. Changes to the printer have been made but won’t show up in the printer properties until the driver is uninstalled and reinstalled.
5. System Requirements:
a. The CD Print Tool only runs under Windows. Many Macs will run Windows and Windows 7 Enterprise Trial can be downloaded forFREE. It should not be hard to find a laptop running Windows in all corners of the globe.
a. (Windows) CD Label Print 1.42 Download
b. (Windows)Nero Cover Designer
c. (Windows)Acoustica CD Labeler
d. (Mac) CD Label Print 1.90 Download
e. (Mac)Disc Label
f. (Windows/Mac)Adobe Print Direct Template
h. Purchase Tray {sold on eBay}.
