Posted on December 20th, 2007 in Blurb, Side2, Templates by QuadCore || 3 Comments

These templates will allow you to print directly from Adobe InDesign to the Canon CD Tray.
For Tray letters C and D the B tray template may be close enough but it has not been tested on C or D tray.
Before printing be sure to turn on the “preview before print” feature. It will give you some idea of the alignment, it is in the Canon printer properties.

Tray B: 
Tray F: 
Warning: By using these templates you accept all risk. No warranty exist on them.
Technorati : , Canon, InDesign Template, Print Direct
Posted on December 9th, 2007 in All Instructions, Blurb2, Blurb_full, Side3 by QuadCore || 117 Comments
Updated: January 25, 2010
This is where everyone should begin:
- Some newer models are showing up and they usually work the same as the older models *if* nothing has changed.
- Please be aware that sometimes the steps don’t work the first time, repeating the steps usually fixes it.
- If tray rejection continues please read the Tray Rejection General Guide and also Tray Rejection and Mac OSX.
- The LCD screen is not used in the process except with the older MP700 series.
- You will get no indication that the process has worked except for the printout, this is how to confirm success.
- Canon CD trays are sold on eBay, search eBay for “Canon CD Tray”.
- Make sure to have paper in both trays and that the paper selection is set to rear tray not the bottom bfore entering service mode.
- If you get 6 blinks error and no print out it means the inner door is still down from steps one.
- For an explanation of Service Mode vs. ROM print out please see “EEPROM & Service Mode Printout“.