For Tray letters C and D the B tray template may be close enough but it has not been tested on C or D tray.

Before printing be sure to turn on the “preview before print” feature. It will give you some idea of the alignment, it is in the Canon printer properties.

Tray B:

Tray F:

Warning: By using these templates you accept all risk. No warranty exist on them.

Technorati : , Canon, InDesign Template, Print Direct

Expand To Read the Full Article

Network printing, scanning, memory card sharing and PC fax.
The C-6700WG provides easy wireless network access with full funcionalities of the compatible Canon device
Real-time Canon printer status monitoring support
The convenience of the Canon status monitoring function is available on the network as if it was locally connected to your PC. You can remotely monitor various defined printer operating conditions such as ink levels and paper empty on a realtime basis.

Buy it here: http://estore.usa.canon.com/Specification.asp?ITEM_ID=37188 $99.99

For More Information Click Here

Compatible Products:

* imageCLASS MF4150
* PIXMA iP1700
* PIXMA iP1800
* PIXMA iP4300
* PIXMA iP6310D
* PIXMA iP6700D
* PIXMA iP90v
* PIXMA MP140

* PIXMA MP160
* PIXMA MP180
* PIXMA MP210
* PIXMA MP460
* PIXMA MP510
* PIXMA MP530
* PIXMA MP600
* PIXMA MP750

* PIXMA MP760
* PIXMA MP780
* PIXMA MP810
* PIXMA MP830
* PIXMA MP960
* PIXMA Pro9000

Technorati : Canon Silex Wireless Print Server MFP/Printer Server

Expand To Read the Full Article

==================
a. The printer should be plugged in but turned off.

b. Hold Stop/Reset button and Power button for 5 seconds.

c. Release Stop/Reset button but continue to hold Power button

d. Press Stop/Reset twice.

e. Release the Power Button

f. Wait for Copy any Light to stop blinking before proceeding. (The light differs depending on the model you have.)

g. press stop/reset twice and then power to print EPROM sheet.

Note: If your model doesn’t have a stop/reset button then use the RESUME button instead.

The alignment numbers are underlined in red. The first number is the horizontal, the second number is vertical.

h. Press stop/reset 9 times (Orange) and then power to select it. (((Pressing stop/reset will alternate between orange or green, green goes left and orange goes right as you face the printer *at least on mine*. ))) Press stop/reset and choose green or orange and then press power, the green light should blink twice to confirm a small change has taken place. Repeat h step two or three times then repeat step g again.

i. Press stop/reset 10 times (Green) and then power to select it. (((Pressing stop/reset will alternate between orange or green, green goes up and orange goes down as you face the printer *at least on mine*. ))) Press stop/reset and choose green or orange and then press power, the green light should blink twice to confirm a small change has taken place. Repeat i step two or three times then repeat step g again.

NOTE: If your alignment is off just a little then only do steps h or i once and then print a sheet to see how much the numbers have changed. Then for the real test you will have to exit Service Mode and go back into regular mode, grab a printable disc and print a test disc. I used old cd’s with sticky paper labels on them, so I didn’t waste my good media.

NOTE 2: If you have the older models IP3000, IP4000, IP5000, IP6000, IP8500 then press the resume or stop/reset button 8 and 9 times instead of 9 and 10.

vLited Vista and Trial Office 2007 cd’s above.

Technorati : , Canon, alignment, cd printing, circle, horizontal, vertical

Expand To Read the Full Article