Tray Rejection and Mac OS X 
August 27, 2007 11,614 views
Posted on August 27th, 2007 in Blurb2, Side3, Tray Rejection by QuadCore || 21 Comments
1. Install the latest driver: http://software.canon-europe.com/ , it is either Printer or Multifunctionals drop down menu that should have your model listed. Canon has newer drivers that support 10.5; look carefully because there may older drivers listed as well. Reboot after install.
2. Install CD Label Print 1.60 and launch it then follow the pictures:
|
|
Page Setup
|
|
|
-
|
|
|
Create your design and click print.
|
|
|
Click Print again.
|
|
|
Quality &Media
|
|
|
You may need to select composite document. Then click Save As PDF.
Open the PDF and you agian need to do a page setup.
|
PS: If you are an Adobe fan there are Print Direct templates for Photoshop, InDesign and Illustrator in the Templates section.
December 10, 2007: New Version of CD LabelPrint 1.60 is out; I have uploaded it to the download section hosted by mediafire: Download Now
May 28, 2008: I have compiled a list of alternative software for use on Mac’s:
HomeDisk Labels for Mac http://www.bestshareware.net/download/homedisk-labels-for-mac.htm
Discus 4 http://www.macupdate.com/info.php/id/7097
CDStyler is a labeling application exclusively for Mac OS X http://www.macupdate.com/info.php/id/14731/cdstyler
LiteLabel (FREE version of Disc Label for OS X) http://www.macupdate.com/info.php/id/23743/litelabel
DiscLabel http://www.smileonmymac.com/DiscLabel/download.html
Disc Cover from Belight http://www.macupdate.com/info.php/id/20856
UnCoverIt http://www.iwascoding.com/UnCoverIt
You can also use Print Direct Adobe Templates which are located on this site.
Tray Rejection General Guide
August 21, 2007 16,715 views
Posted on August 21st, 2007 in Blurb2, Side3, Tray Rejection by QuadCore || 41 Comments
You have done the Five Easy Steps and everything seems to have worked but it keeps kicking the tray back out and telling you that there is no cd-r or the inner door is open, these are some of the things that might be causing it:
- CDRS=(000) should be something other then zero’s, if it’s zero’s then you should repeat the five steps. You can find CDRS numbers by enter service model as instructed for your model and then pressing the {resume} or {stop/reset} button twice and then the power button. (Sometimes it will be 000 and still work though)
- Try an EPROM reset: http://damnprinter.com/?p=50 some models require this procedure.
- Fully uninstall the driver using the actual uninstaller.exe, then reinstall.
- After clicking print in cd label print wait until the screen tells you to insert the tray otherwise it will reject the tray because it’s not ready for it yet.
- Sometimes unplugging the USB cable and then plugging it back in will fix the problem. This is more a Windows issue.
- Sometimes the USB cable is bad, try another cable.
- You have place a cd/dvd that already has printing on it, the sensors will detect this and eject the tray. This feature is found in the printer preferences under the maintenance tab, click custom settings then uncheck the box call “Detects a printable disc on the cd-r tray”. After trying this be sure to turn it back on because it’s intended as a safety feature.
- CD Label Print and Mac OSX seem to have a real problem with tray rejection but there is a work around for it which can be found here: http://damnprinter.com/?p=181
Updated: April 25, 2008
CD LabelPrint and OSX
May 9, 2007 9,695 views
Posted on May 9th, 2007 in Blurb2, Side3, Tray Rejection by QuadCore || 2 Comments
Importing the image to print on the CD-R/DVD-R
Note: 10 pictures when you click expand.
 |
1. Select Applications from the GO
menu. Double-click the CD-LabelPrint
folder, and then CD-LabelPrint to start
CD-LabelPrint. |
 |
2. Click (Select Paper).
The Paper Selection dialog box opens. |
 |
3. Select CD Label Print from Print
Genre, and select Standard CD (12cm)
from CD Type.
4. Click OK.
5. Edit the label image.
————————————-
Note:
Refer to the CD-LabelPrint’s
manual for more information
about how to edit the label image.
————————————-
|
Printing on the CD-R/DVD-R
 |
1. Select Page Setup from the File menu.
The Page Setup dialog box opens. |
 |
2. Specify the required settings.
Format for: Select the printer
you are using.
Paper Size: Select CD-R Tray B.
Orientation: Select the portrait icon.
Scale: Enter 100%.
3. Click OK. |
 |
4. Click Print.
The Print Label Sheet dialog box opens. |
 |
5. Confirm the changes you made, then
click Print.
—————————–
Note:
The Printable Label image on the Print Label
Sheet dialog box shows the print image of the CD-R
Tray (rectangle) and the CD-R (circles). The leading
edge of the CD-R Tray is at the bottom of the image.
—————————–
6. When the confirmation message
appears, click OK.
The Print dialog box opens.
|
 |
7. Select Quality & Media from the popup
menu. |
 |
8. Select Printable disc (recommended)
or Printable disc (others) from the
Media Type pop-up menu.
———————
Note:
If the Printable disc (recommended) setting produces
unsatisfactory results (e.g., if images are too dark or
characters appear blurred), select Printable disc
(others). Print quality on CD-R/DVD-R may vary
depending on the media you use.
———————
9. Click Print.
—————–
Note:
If the CD-R Tray is previously inserted, it may be
ejected. In such a case, wait until the message in step
10 appears.
—————–
|
 |
10. Insert the CD-R Tray and press the
RESUME/CANCEL button on the
printer as instructed in the message and
then click OK.
——————
Note:
• Do not close the CD-R Tray Feeder during
printing on the CD-R.
• Refer to the CD-LabelPrint’s manual for more
information about CD-LabelPrint.
——————
|
(4 votes, average: 4.00 out of 5)
